Dovetail tool for CNC / drawers
9/3/14
anyone using CNC for dovetail drawers?
what type of tool needed, I went to Vortex and found out the 7600 kit with 9282 inserts over $700.
can I use any Amana tool? and what type?
Thank you
9/3/14 #2: Dovetail tool for CNC / drawers ...
We build 99% of our drawer boxes in house using the dovetail bit from cnc solutions. We have cut 100s of boxes and are still on the original bit. You can't sharpen it or you'll lose the geometry but they are way cheaper than the vortex insert bit. If you are using cabinet vision it is already set up for this bit.
9/4/14 #3: Dovetail tool for CNC / drawers ...
thank you for your response,
is this the one you are talking about?? i got it from cnc solution site
SKU: DCP41897.
Category: Dovetail Tooling.
Tags: cnc, Dove Tool.
I'm still using Mozaik, at the tool section there is ONL two tools from Vortex each one around 700$
9/4/14 #4: Dovetail tool for CNC / drawers ...
That's the one. I think it makes a nicer looking joint than the vortex bit. I've never used mosaic but I imagine there must be a way to use this bit with it.
9/5/14 #5: Dovetail tool for CNC / drawers ...
Website: http://www.southeasttool.com
If you are talking about cutting the dovetails in a nested operation, we can help you with that. We actually have 3 different tools for the different wood thicknesses.
8/1/17 #6: Dovetail tool for CNC / drawers ...
Website: http://www.toolmanshop.com
The DCP41897 CNC Dovetail bits have been hard to come by. I had Southeast tool reproduce it and its available here.
https://www.toolmanshop.com/products/dovetail-cnc-bit-set091616-3crh