Small dots on drawer fronts in cv8
11/12/15
Website: http://griffincustom.com
I've gone through all my layers, and can't get rid of the little dots. Any Ideas are much appreciated.
Click the link below to download the file included with this post.
TCR.pdf
11/12/15 #2: Small dots on drawer fronts in cv8 ...
Website: http://www.taghkanicww.com
Do they show up when you send the view to drawing? I would say layers but you said you went thru them. I do see these on my views but they go away when sent to drawing.
11/12/15 #3: Small dots on drawer fronts in cv8 ...
Good point Leland. They do go away when I send to drawing. Sometimes I print the drawing from the elevation page for various reasons, and thats when they show up. I received very liitle assistance from support, since I didnt want to give them 1200 to fix this. Appreciate you chiming in.
11/13/15 #4: Small dots on drawer fronts in cv8 ...
Website: http://www.cnc-cabinetparts.com
I do not know why it does that the only thing I can think of is the fact that your drawing is a 3-D model when you are working on it and it is ghosting lines and drilling from behind
11/13/15 #5: Small dots on drawer fronts in cv8 ...
I'm betting that those are drawer front mounting holes. Do you see them when you change from line drawings to shaded or textured view?This is setup in your drawer box wizard under subfronts.
11/13/15 #6: Small dots on drawer fronts in cv8 ...
NM. Just looked at the picture, sorry.
Those are your snap points. They help when drawing. If you don't like them, go to the bottom right corner and turn them off.
11/13/15 #7: Small dots on drawer fronts in cv8 ...
Thx Pdub! That was it. A minor thing, but was making me crazy.. Must of hit it by accident and they started showing up.