Four Case Histories for Smart Specifying

December 4, 2001

An Insider's Guide to Specifying Hardwood Flooring, Cabinetry and Decorative Millwork

Reprinted with permission from The Hardwood Council website.

Case #1: Profiles in Creativity: Stacked Mouldings

Case #2: A Rift in Specifications: Sawing Methods

Case #3: Custom Floors, Affordably

Case #4: Smart Use of Materials: The Choices are More Than Clear


Case #1: Profiles in Creativity: Stacked Mouldings

The Challenge
Create an ornate, custom 14-inch crown moulding for a conference room and hallway. The client wants cherry, but has a limited budget.

The Solution
Design the crown moulding by stacking a combination of stock moulding profiles. Use poplar with a cherry stain to achieve the desired appearance. Specifying stock profiles and a more abundant hardwood species can reduce material costs by more than 60 percent.

What You Need To Know

Lumber Dimensions
Why You Can't Get 14-Inch Mouldings from a 24-Inch Diameter Tree

Nature pre-selects the color, grain pattern and character of each hardwood species. It also determines the available dimensions for North American hardwood lumber.

A hardwood tree may be 55 feet tall and 24 inches in diameter, but it will yield boards that are no more than 12 inches wide. Mouldings, then, will necessarily be narrower than that. Larger trees may yield wider lumber, yet wide boards are more difficult to work with because of hardwood's natural expansion and contraction characteristics. Since standard minimums are 5-inch widths for upper grade hardwood lumber, an alternative is to build a custom moulding from multiple stock profiles -- a process called stacking.


An intricate moulding design can be created by combining individual profiles through "stacking."

Stacked Mouldings
Through stacking, several complementary stock profiles are joined to create moulding with a custom look. More than 350 standard moulding profiles are produced in the United States and each typically costs $200 - $300 less than a custom profile. If that doesn't sound like much for a custom appearance, consider that an elaborate crown moulding can combine up to 10 separate profiles. Creating one-of-a-kind profiles can boost project costs by several thousand dollars -- and that's before the lumber in purchased.


With more than 350 stock profiles available, custom profiles often are an unnecessary expense.

Species Substitution
The Right Look at the Right Price

Another way to manage cost is to let the finish make the presentation over the natural grain or color. Some lighter-hued, close-grained hardwoods, such as poplar or basswood, often are stained to resemble other species.

Species substitution works especially well in decorative applications above eye-level -- crown mouldings and recessed ceiling panels, for instance. More functional millwork applications, such as railings, door and window trim, also present good opportunities to specify a lower-cost hardwood species.

Building Your Hardwood Knowledge
The Relative Abundance of North American Hardwoods


*Includes Sap Gum, Basswood, Cottonwood, Hackberry, Hickory, Pecan, Birch, Beech, Tupelo, Elm, Walnut and other Hardwoods. Source: United States Department of Agriculture (USDA) Forest Service

How Hard Are Hardwoods?
Each North American hardwood species has unique physical properties and there are wide variations in their relative hardness. The hardest species are well-suited for commercial and residential applications with high traffic and heavy wear.

Solid Advice
-- Specify hardwood lumber in widely available dimensions to control costs. Generally, in any species, hardwood lumber that exceeds 10 inches in width commands a premium.

-- Stack standard mouldings to create custom millwork while reducing material costs.

-- When budgets are tight, one hardwood can be stained to resemble another. Several abundant light-colored species can look like darker hardwoods.

-- The cost of hardwood products varies from region to region. Be creative with species that are abundant in your part of the country. This may significantly lower the price of a project.

-- For more information about installing and finishing hardwood millwork, see Hardwood Flooring and Millwork Finishing Options: Pre-Finished or Site-Finished? and Working On-Site with Hardwood Millwork.



Total Pounds of Pressure Applied Before Marring Occurs

Species (Kiln Dried)Pounds

Hickory, Pecan 1,820

Hard Maple 1,450

White Oak 1,360

White Ash 1,320

Beech 1,300

Red Oak 1,290

Yellow Birch 1,260

Green Ash 1,200

Black Walnut 1,010

Soft Maple 950

Cherry 950

Alder 590

Yellow Poplar 540

Basswood 410

Aspen 350

(Source: Wood Handbook- Wood as an Engineering Material, USDA, Washington, D.C.)



Case #2: A Rift in Specifications: Sawing Methods

The Challenge
A homeowner wants rift-sawn white oak paneling and flooring to prevent excessive shrinking and swelling. However, the added cost will put the project well over budget.

The Solution
Specify a small but practical use of rift-sawn paneling to conceal audio and visual equipment. Select plain-sawn lumber for the floor to add character and visual interest. Plain-sawn oak performs as well as quarter- and rift-sawn when properly dried and acclimated to the home before installation, and can cost less.


There is a noticeable difference in grain patterns among plain-, quartered- and rift-sawn lumber.

What You Need To Know

Sawing Methods
Hardwood logs become lumber by one of several sawing methods. Each gives hardwood boards a distinct grain pattern, along with performance characteristics that must be considered when specifying. Sawing methods are plain sawing, quarter sawing and rift sawing.

Plain-Sawn Lumber
Plain-sawn hardwood boards are produced by cutting tangentially to a tree's growth rings, creating the familiar "flame-shaped" or "cathedral" grain found in most hardwood flooring and millwork. This method also produces the most lumber from each log, making plain-sawn lumber a cost-effective design choice.

Quarter-Sawn Lumber
Quarter sawing means cutting a log radially (90-degree angle) to the growth rings to produce "vertical" graining. This method yields fewer and narrower boards per log than plain sawing, boosting their cost significantly. Quarter-sawn boards are popular for decorative applications such as cabinet faces or wainscoting.

Rift-Sawn Lumber
Rift sawing at a 30-degree or greater angle to the growth rings produces narrow boards with accentuated vertical or "straight" grain patterns. Rift-sawn boards are often favored for fine furniture and other applications where matching grain is important. This type of lumber is available in limited quantities and species.

Sawing Methods, Moisture Content and Dimensional Change
A product of nature, hardwoods respond to changes in relative humidity by exchanging moisture with their environment. Plain-, quarter-, and rift-sawn boards react differently to these changes. Because hardwoods are more dimensionally stable across the grain, plain-sawn lumber expands and contracts more than quarter-sawn hardwood boards, which have a more vertical grain pattern. Likewise, quarter-sawn lumber, with its emphasized vertical grain, shrinks and swells less than rift-sawn hardwood boards.

With a 20 percent change in relative humidity, plain-sawn hardwood panels can expand or contract as much as 1/8 inch per foot of width, depending on the species. To accommodate these effects, it's important to know:

-- The recommended moisture content of hardwood products before installation.

-- How to acclimate hardwood products to their new home.

-- Installation techniques that take hardwood's natural expansion and contraction into account.

How Dry Should Hardwood Products Be?

How Much Dimensional Change Should You Expect?
These figures represent possible width change in 12 inches of lumber when moisture content is reduced from 10 percent to 5 percent. Figures are for plain-sawn unless indicated otherwise.



SpeciesDimensional Change

Ash 10/64"

Basswood 10/64"

Beech 14/64"

Butternut 8/64"

Cherry 9/64"

Hard Maple12/64"

Hickory11/64"

Oak, Red and White
- plain-sawn
11/64"



Oak, Red and White
- quarter-sawn

7/64"

Oak, Red and White
- rift-sawn
7/64"

Pecan 11/64"

Soft Maple 9/64"

Walnut 10/64"

Yellow Birch 12/64"

Yellow Poplar 9/64"

(Source: Architectural Woodwork Institute, Architectural Woodwork Quality Standards, 6th Edition, p. 36)

Check the Moisture Content
Moisture content is the amount of moisture in wood, expressed as a percentage of its oven-dry weight. The proper moisture content for kiln-dried hardwood products varies in different regions of the country. When receiving a shipment of hardwood paneling, flooring, millwork or cabinetry, pull out several sample boards and use a hand-held moisture meter to measure their moisture content. The figure should closely match the one recommended for your part of the country. If it doesn't, take the following precautions:

Let Hardwoods Adjust to Their Surroundings
Sawmills dry and condition hardwood lumber to the moisture content expected in service. During transport and storage, hardwoods can accumulate moisture or become too dry. To avoid problems, let hardwood products adjust to the site before installation. Here's how:

-- Have hardwood products delivered after all windows and doors are installed, and masonry and plastering are complete.

-- With the home's HVAC system operating at a normal level, unbundle and store hardwood paneling, flooring and millwork for three to five days in the room where it will be installed. If delivered before the HVAC system is operational, store the material in a dry environment until you can follow the instructions above.

Plan for Natural Expansion and Contraction
Here are a few important installation tips for minimizing expansion and contraction of hardwood paneling, flooring and millwork during seasonal changes in relative humidity:

-- Install hardwood paneling so it moves across the grain. Use narrow widths when possible.

-- For large areas, such as paneling, leave an expansion gap to accommodate the natural expansion and contraction, based on changes in humidity specific to your region. Conceal the edge with baseboards or mouldings.

Solid Advice
-- Specify hardwood sawing methods based on appearance and cost. You can effectively manage how much hardwoods shrink and swell by letting them adjust to a new environment. Control moisture content through proper storage and care of hardwoods at the work site.

-- Plain-sawn hardwoods of any species cost significantly less than a quarter-sawn counterpart. Rift-sawn hardwoods are very expensive and have limited species availability.

-- For more information on maintaining hardwood products before and after installation, see Installing Hardwood Floors over Concrete Slabs and Hardwoods in the Bath: Finishing for Wet, Humid Environments.


Case #3: Custom Floors, Affordably

The Challenge
Create distinct personalities for an adjoining kitchen, hallway and living room that all feature 3/4-inch red oak strip flooring.

The Solution
Use a clear finish to create natural warmth in the kitchen, design a decorative inlay for the hallway or stencil a pattern in the living room.

What You Need To Know

Design Techniques
Decorative Inlays

With the advent of laser technology, decorative inlays have become an affordable way to create hardwood floors with signature style. While many decorative inlays still are produced by highly skilled craftsmen, new laser-cutting techniques are stirring a revival in this classic "old world" design tradition.

How They're Made--
Decorative inlays are most often constructed from a carefully designed combination of individual hardwood components. Once the design is created, components are laser-cut from hardwood flooring planks, usually 5/16-inch-thick.

The components then are joined with glue or urethane adhesive. When the inlay is dry, edges are routed to match the tongue and groove joints for the rest of the hardwood floor, and the inlay is set in place.

To create more dramatic inlays, hardwood components are sometimes saturated with aniline dyes to add color and contrast that remains even after resanding.

While stock inlays are becoming plentiful, it is also relatively easy to create customized designs with details as intricate as a family crest or map of a favorite vacation island.

Stenciling
Stenciling decorative designs onto hardwood floors is another low-cost way to achieve a one-of-a-kind look.

Here's a step-by-step guide to creating a stenciled hardwood floor:

-- Clean the floor. Make sure it's smooth and in good condition.

-- Measure the floor and map out the stencil locations.

-- Set the stencils in place with masking tape or spray mount, then apply the stain or paint with a brush or spray.

-- With the paint still wet, carefully remove the stencil (being careful not to smear the design).

-- If stenciling a border, reposition the stencil by overlapping slightly with the previous application and continue until the border is complete.

-- When the floor is completely dry, remove any remaining tape and glue.

-- Wait at least 24 hours, then apply a protective coating, such as polyurethane or varnish.

Specialty Finishes and Stains
Finishes are the most commonly used tools for expanding design and decorating options with hardwood floors. Here's a quick primer on the types of stains and finishes available:

-- Specialty Finishes include bleaching, pickling, antiquing and coloring. Pre-finished floors are the best choice for these applications.

-- Stains darken hardwood but preserve the appearance of the grain.

-- Clear Finishes showcase the natural color and grain.

-- Varnishes and Shellacs provide a hard finish but are not waterproof (use is limited).

-- Lacquers are more water-resistant than varnishes and shellacs, but can be susceptible to cracking and peeling.

-- Moisture-Cure Urethanes provide the hardest finish but most are limited to a glossy appearance.

-- Acid-Curing Swedish Finishes are fast-drying and resist yellowing.

-- Penetrating Finishes preserve the appearance of the grain while soaking into hardwood pores. They are an effective way to "color" a hardwood's natural grain.

Solid Advice
-- Spice up a hardwood floor design by featuring decorative inlays, stencils, specialty finishes and stains. Laser-cutting technologies make it easier to create customized designs, such as the logo of a favorite sports team. Stenciled borders can be applied in a large room for less than $100.

-- Take notice -- bleaching or white-washing any hardwood floor can cause chemical damage to the surface weakening the floor's wood fibers.

-- For more information on stains and finishes, see Hardwood Flooring and Millwork Finishing Options: Pre-Finished or Site-Finished? and Bleaching, Pickling and Antiquing Hardwood Flooring and Millwork.


Case #4 - Smart Use of Materials: The Choices Are More Than Clear

The Challenge
The client prefers Clear maple and cherry, but the budget doesn't justify all premium-grade materials for a desk, built-in bookcase and hardwood strip flooring in a contemporary home office.

The Solution
Specify upper-grade hard maple and cherry (FAS) for visible areas, such as the desktop and
cabinet doors. Build non-visible areas -- sides and interior shelves -- from a variety of species in No. 1 Common, a lower-cost, intermediate grade priced less than FAS.

For the flooring, specify No. 1 Common, 3/4-inch strip flooring in a variety of species. This flooring grade costs less than Clear. The use of multiple species and character marks add visual interest to the floor.

Lower-grade hardwoods in the bookcase and floor reduce material costs and accommodate the client and his budget.


Specifying lower grades of lumber for non-visible areas, including drawers, interior shelves and non-exposed sides, reduced the material costs of this maple and cherry built-in.

What You Need To Know

Nature instills wood with a variety of character marks -- knots, mineral streaks, pitch pockets -- that develop as a tree grows, forms branches and interacts with its environment. What's more, heartwood, the innermost portion of the tree, usually is darker in color than sapwood which is closer to the bark. Some architects and designers prefer to use sapwood with heartwood for contrast.

Boards featuring character marks are not premium grade, but they are preferred for many applications because they add character and visual interest. They're also a great choice for applications where wood will be painted or not be visible. Higher grades of lumber, which have few, if any, character marks, generally are preferred for applications such as fine tabletops and cabinet doors.



Character marks, such as knots or burls, give hardwoods added visual interest.

Lumber Grades
Hardwood lumber grades and grading rules have been established and are governed by the National Hardwood Lumber Association (NHLA). Flooring grades have been set and are maintained by the National Oak Flooring Manufacturers Association (NOFMA).

The NHLA grading system, which is used by sawmills and their customers, describes the amount of "usable" clear material in a board. The highest grade boards are long, wide, and free of character marks. They are graded FAS. Select boards may contain slight character marks such as pin holes or small tight knots. The range of NHLA grades, in descending order:

-- FAS
-- Select
-- No. 1 common
-- No. 2 common
-- No. 3 common


The NHLA grades are based on the amount of "usable" clear material in a board. The highest grade lumber, FAS, generally costs more than No. 1 Common.

NOFMA standards prevail for grading oak and other species of flooring. These grades are appearance-based and are determined by the occurrence of character marks. NOFMA grades include:

-- Clear
-- Select
-- No. 1 common
-- No. 2 common



The standard grading system for flooring, NOFMA grades are appearance-based. NOFMA also has grading standards for pre-finished oak, maple, beech, birch and pecan flooring.

In addition, the Clear and Select grades are further identified by sawing method, see Case #2.

NOFMA also sets separate grading standards for pre-finished flooring:

-- Prime
-- Standard
-- Tavern

Solid Advice
-- Use the range of hardwood product grades and costs to your advantage. Top grade, clear material is not always necessary.

-- Know the systems and the species and their characteristics. Familiarity with NHLA and NOFMA grades can make specifying hardwoods easier and more effective.

-- For more information on hardwood grades and built-ins, see Hardwood Flooring Grades Offer Affordable Choices and Hardwood Built-In Installations.

© 1999 The Hardwood Council

Reprinted with permission from The Hardwood Council website.