RT Machine Co MachineryMax Holz-Her

2021 Northtech NT SLR-16SC Precision 16″ Straight Line Rip Saw ( 4-1/16″ depth of cut)

Listing #548930 Listed on: 11/03
Details - Machine for Sale
Category:Saws-Self_Feed_Rip
Price: $18,500.00
Type:Used - Very Good
Manufacturer:Northtech
Model:NT SLR-16SC
Location:Kingston, TN
Sale Type:Dealer
Seller:360 DEGREE MACHINERY LLC [Contact]
Phone:630-229-6705
Year:2021
Electrical:3PH
More Info:360 Degree Machinery
Description


Our customer upgraded to a mutli-blade and his loss is your gain. Hard to find late model 2021 Northtech NT SLR-16SC Precision 16″ Straight Line Rip Saw with a 4-1/16″ depth of cut. See below for full specs.

Our customer upgraded to a mutli-blade and his loss is your gain. This is a hard to find late model 2021 Northtech NT SLR-16SC Precision 16″ Straight Line Rip Saw with a 4-1/16″ depth of cut. Powered by a 15 hp motor. The True Track Chain and Race are in excellent condition and with out issue, tracking flat and true. The feed is powered by a 1.5 hp motor that will allow for speeds of 40-120 FPM. There are two rows of heavy-duty kickback fingers. (8) Large pressure rollers for optimum glue line ripping. An encased 100mw laser light and mounting bracket are included with thumb screw adjustability.

This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company. It is owned by 360 Degree Machinery and located in our inventory in Kingston, TN.

FEED SYSTEM
Saw motor: 15HP, 3PH 230/460V
Feed: 1.5HP variable from 40′ – 120′ FPM
PRODUCT DIMENSIONS
Min. thickness: 3/16″
Max depth of cut: 4-1/16″ with 16” Blade
Max depth of cut: 3-1/16” with 14” Blade
Max. width of stock: (Blade to column arms) 18-1/4″


FEATURES
“True Track” Chain and Race
Table size 69” x 35”
The machine frame is constructed of a 1″ thick base plate
Solid steel frame with 1/2″ thick column arms.
Safety door switch with pneumatic motor brake.
2″ arbor and large support bearings.
Glue line guarantee 12′ on 4/4 at 50 FPM
All motors and electricals are UL-rated.
Industrial fence with cam-lock quick release on rack and pinion glide.
Two rows of heavy-duty kickback fingers.
(8) large pressure rollers for optimum glue line ripping.
An automatic mechanical oiling system with low oil level feed shutoff.
A 100mw laser light and mounting bracket are included.
(1) Toolbox
Amperage requirements: 15HP + 1.5HP 230V / 460V: 39.7A / 19.85A.
Dust requirements:
(1) 4″ dust port requiring 450 CFM
(1) 6″ dust port requiring 981 CFM
Weight: 2,285 lbs.
Machine dimensions: (L) 77″ x (W) 57″ x (H) 66″
Warranty is one-year parts
All machines are tested stateside at the factory before shipment providing trouble-free start-up.
SPECIFICATIONS:
Main Motor Hp. = 15 hp.
Direct Drive = Direct Drive
Voltage/ Freq. = 230/460 Volt 60Hz
Phase = 3 Phase
Amp Requirement = 40/20 Amps
Feed Hp. = 1.5 Hp.
Feed System = 4” Split Chain with True Trac
Drive System = Belt
Feed Speed = 40-120 FPM
Variable Speed = Mechanical
Elevation Style = Manual Wheel Adjustment
Elevation Sys. = Linear Gauge with Hand Wheel
Total Hp. = 16.5 Hp.
Electronics = CE Approved Components
Dual Voltage = 230/460 Volt
Control Voltage = 110 Volt
Assisted Start = Wye Delta
Pass-Line = 33-3/8”
Throat Capacity = 18-1/4”
Min. Length = 12” 2nd Roller to Kickback
Max. Length = Infinite
Min. Width = 1″
Min. Thickness = 3/16″
Max. Thickness = 4-1/16” W/ 16” Blade
Glue Line Rip = Guaranteed 12′ 4/4 stock @ 50 FPM
Arbor Rpm = 3520 RPM
Blade Size = 14” Tungsten Carbide Tipped
No. of Teeth = 70 Tooth
Tooth Spacing = 5/8 In.
Blade Kerf = .197 In.
Vertical Travel = 3/16” – 3-3/8”
Dust Collection = 1417 Total CFM
Dust Port Out = 4” Top 6” Bottom
Arbor Diameter = 2″ Arbor
Idle Rollers = (8) Idle Rollers
Hold Down Style = 8 Spring Loaded Hold Downs
Kickback Finger = (59) Lower (32) Top
Emergency Stop = Push Button
Rear E Stop = Push Button
Safety Feature = Door Switch / Motor Brake
Guarding = High Visibility Guarding
Oiler = Automatic Mechanical Oiler
Low Oil Warning = Low Oil Shut-off
Fence Type = Industrial Cam Lock Quick Rel
Fence Dims. = 1-3/4” x 23-3/4”
Brake System = Air Brake on Motor
Frame Const. = 1” Base 1/4” Frame 3/4” Arms
Worktable Dims. = 69” x 35”
Table Const. = Steel
Laser = 100mw Laser Light & Mount Bracket
Decible Rating = 84 dB
Net Weight = 2170 Lbs.
Gross Weight = 2285 Lbs.
Machine Dims. = 77” x 57” x 66”
Packaging Dims = 81” x 58” x 74”

360 Degree Machinery

Contact this Seller (360 DEGREE MACHINERY LLC):

*Enter the correct numbers into the field below:

Date of your Birth:

In accordance with the Site User Agreement, WOODWEB, Inc. assumes no responsibility for the accuracy or content of, or any transaction resulting from, listings posted at WOODWEB's Machinery Exchange. Please use caution, common sense and prudent commercial practices when utilizing WOODWEB's Machinery Exchange.

W. Moore Profiles Suction Cups, Vacuum Lifters, Vacuum Pumps from Anver Corporation
Get Machinery Updates!

Three ways to get alerted about new Machinery:
  • Daily Machinery-Gram (Email)
  • Email Subscriptions - get instant, daily, or weekly emails (must be registered)
  • Alerts - Create custom alerts and get notified when new Machines match it! (must be registered) Just search, then click the Create Alert button